For easy starting and mowing grass around obstacles. Multi-function controls, loop handle, STIHL 2-MIX engine.
Supplied with single shoulder harness and AutoCut C 26-2 mowing head.
Extend your domestic warranty from 2 to 3 years with the purchase of 5 litres of STIHL MotoMix® fuel and this product. Your STIHL Approved Dealer will register your extended warranty on the STIHL warranty database at point of purchase.
Don’t forget to check your work area for wildlife before starting to use your tool. In particular, you should check for nesting birds before trimming hedges, as well as checking for other small animals such as hedgehogs before trimming long grass.
STIHL professional tip - to get the most from your mowing line, we recommend popping it in a bucket of water for 12-24 hours before using it to make it more flexible and less likely to break.
STIHL 2-MIX engine
HIGHLY POWER-EFFICIENT. With the STIHL 2-MIX engine, you can reduce exhaust emissions and fuel consumption, and therefore operating costs. This 2-stroke engine is low-maintenance and uses fuel efficiently even at high power levels. Use a mixture of petrol and engine oil as fuel. The STIHL 2-MIX engine complies with the strict EU Stage V emissions directive.
Manual fuel pump
FOR FEWER STARTING STROKES. The manual fuel pump reduces the number of strokes required to start the tool, making the start-up process quicker and easier This is particularly helpful after longer breaks in operation. To use it, actuate the pump several times before starting. This will ensure that there is enough petrol in the carburettor when starting.
STIHL ErgoStart
EFFORTLESS STARTING. STIHL ErgoStart saves you energy when starting your tools. A smooth and even pull on the starter cord is all that’s needed. The required speed on the starter cord is significantly reduced, and the engine starts quickly and reliably even with a slow pull. An additional spring between the crankshaft and the starter cord roll makes this easier.
Stop button
RESTART WORK QUICKLY. With the stop button, you can switch off your tool quickly and easily for a short break, for example. As the button springs back to its original position after actuation, the engine is immediately ready to start again. This provides more comfort after breaks and increases your work efficiency.
Technical details
| Displacement |
27.2 cm³ |
| Power |
0.85 kW |
| Engine power |
1.15 HP |
| CO2 |
853 g/kWh |
| Device weight without refuelling |
4.8 kg 1) |
| Cutting circle diameter |
420 mm |
| Tank capacity |
0.340 l |
| Tank capacity |
340 cm³ |
| Device length without cutting tool |
170 cm |
| Sound pressure level |
95 dB(A) 2) |
| Sound pressure level |
94 dB(A) 2) |
| Sound power level |
104 dB(A) 2) |
| Sound power level |
103 dB(A) 2) |
| Vibration value on the left in right-handed operation |
6.4 m/s² 3) |
| Vibration value on the right in right-handed operation |
6.5 m/s² 3) |
New content has been loaded.
