FN Pile & Sons

TRACMASTER Snow Plough BCS Implement

snow plough

The snow plough is the fastest way of clearing snow. It is very safe to operate and simple to use yet is able to move significant amounts of snow in a short space of time.

The snow plough has a working width of 100cm and can easily clear snow up to 30cm deep.

The curved blade efficiently rolls the snow up and away from the blade and off to either side.

The plough can be angled through 5 positions - two left, two right, and straight ahead - allowing the angle of the blade to be adjusted to deal with deep snow.

The snow plough is supplied with saucer shaped skids at the rear of the plough as standard. These can be easily adjusted for working height by simply adding or removing spacers to raise or lower the height.

If better manoeuvrability is required, or the snow plough is being used on delicate ground, then the skids can be replaced by optional castor wheels if required. 

There is also an optional soft blade kit available if the plough is to be used on sensitive surfaces

Which power units will the snow plough fit to?

Are any couplers or toolbars needed?

If the power unit has the  fImplement Quick Coupling fitted then you will need a Blank Coupler

You might want to consider the castor wheels and the soft blade kit especially if the plough is to be used on sensitive surfaces.

If fitted to the BCS 738 diesel, 740, 750, 770HY, 630WS or 660HY then additional weight may need to fitted to the plough to balance the machine and implement.